DutchRC Show full post »
Nightswatch
Nice so when is next video of using acetone to make it look unreal good
If you think you got your flying under control, Your not going fast enough
Quote 2 0
DutchRC
Soooo you're basically saying it doesn't look good enough huh?
Well yeah.. that might indeed be a good subject for a video

(gonna be doing some 'normal' RC video's first though)
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 1 0
Nightswatch
actuallly your going to get few stringer at the end priduct here n there as that usually gets sanded off to bad you didn't have a cheaper 3d printer to compare quality creality kicks butt
If you think you got your flying under control, Your not going fast enough
Quote 1 0
DutchRC
Ghehe yeah.. I would like to try another printer in a while to indeed compare things..
Going Back in quality is not something I was planning to do though :$
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 1 0
Nightswatch
Quote:
Ghehe yeah.. I would like to try another printer in a while to indeed compare things..
Going Back in quality is not something I was planning to do though :$


But that is what its all about quality at a decent price even the shop that printed my Speed brakes were 4 times the price you paid still had to clean up the finished product
If you think you got your flying under control, Your not going fast enough
Quote 0 0
DutchRC
I guess there is money to be made in printing stuff on order?
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 1 0
Nightswatch
Quote:
I guess there is money to be made in printing stuff on order?

Yes there is if you have the skills to design and make it happen wlld sent me to 3d hub place where a person can get in contact with printers and pay to get something done but like anything else costs go up if there designing
If you think you got your flying under control, Your not going fast enough
Quote 0 0
Wildthing
Quote:
Nice so when is next video of using acetone to make it look unreal good

Acetone works good on ABS filament but not on PLA.
Quote 1 0
Wildthing
Quote:
But that is what its all about quality at a decent price even the shop that printed my Speed brakes were 4 times the price you paid still had to clean up the finished product

The printer is only a portion of the prints, there are the different manufactures of plastic plus even in the same manufacture different colors will print different and then there is all the settings to fine tune each and every aspect of it. Even if you have the best of best printer and the plastic you are trying to use is not being friendly you end up with a crappy print. This is just the tip of the ice berg.
Quote 1 0
Wildthing
Quote:
Yes there is if you have the skills to design and make it happen wlld sent me to 3d hub place where a person can get in contact with printers and pay to get something done but like anything else costs go up if there designing

In some of the slicers I can set the cost of a roll and when I slice it depending on quality it will give me the cost of the print.
Quote 1 0
DutchRC
Yes.. you can do that in Slic3r indeed..
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 2 0
DutchRC
Halloa guys

I've got me a new 3D printer in a few days ago, and got right into building it.. Well I should say I got right into shooting video's about it
This (new) Ender-3 is quite similar to the hugely popular CR-10 but it's footprint is a bit smaller, as is it's price

Link to this printer: Creality 3D - Ender-3 desktop printer

I will be doing a good nr. of video's on this printer! Here is my build-report of it (sorry.. long video)



Specifications
build square: 220 x 220 mm
build height: 250 mm
machine size: 440 x 410 x 465 mm
max speed: 180 mm / s
nozzle diameter: 4 mm
fillament diameter: 1.75mm
layer thickness: 0.1 - 0.4 mm
resolution: 0.1 mm
max nozzle temp: 255 C
max bed temp: 110 C
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 1 0
Wildthing
Quote:
Halloa guys

I've got me a new 3D printer in a few days ago, and got right into building it.. Well I should say I got right into shooting video's about it
This (new) Ender-3 is quite similar to the hugely popular CR-10 but it's footprint is a bit smaller, as is it's price

Link to this printer: Creality 3D - Ender-3 desktop printer

I will be doing a good nr. of video's on this printer! Here is my build-report of it (sorry.. long video)



Specifications
build square: 220 x 220 mm
build height: 250 mm
machine size: 440 x 410 x 465 mm
max speed: 180 mm / s
nozzle diameter: 4 mm
fillament diameter: 1.75mm
layer thickness: 0.1 - 0.4 mm
resolution: 0.1 mm
max nozzle temp: 255 C
max bed temp: 110 C

Looks like a good structure and the print size is good along with the price.
Quote 1 0
DutchRC
For Sure the CR-10 did quite well.. this one actually does Better
All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 1 0
DutchRC
And.. Part 2 of my series about the new Ender-3 printer
This here is my short-term review of the printer.. I've obviously only had it for a few days.. In a while I'll also post a long(er) term review of it..

In short: I think this printer is VERY well made, and wurth more then it costs..

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 2 0