Sidewayskiwi
OK
How do I turn this into a PDF so my printer can tile and scale to whatever I want?
Quote 1 0
Sterling101
I'll have a go at tracing it and converting it if you want?
Whoever said nothing is impossible had obviously never tried slamming a revolving door...
Quote 2 0
Sterling101
Not perfect but a quick trace set to about a 36" span if my measurements are correct...
Whoever said nothing is impossible had obviously never tried slamming a revolving door...
Quote 1 0
Sidewayskiwi
Sterling101 wrote:
I'll have a go at tracing it and converting it if you want?

Give it a go if you want
Quote 0 0
Sidewayskiwi
Sterling101 wrote:
Not perfect but a quick trace set to about a 36" span if my measurements are correct...

Looking for @74inch ws
Quote 0 0
Sterling101

Looking for @74inch ws


I'll have a go tonight after work.  Should be easy enough to scale up 🙂
Whoever said nothing is impossible had obviously never tried slamming a revolving door...
Quote 0 0
bogusbandit56

Looking for @74inch ws


Are you going for the worlds largest profile B17? 😃
Wot, no Depron?
Quote 1 0
solentlife
One of the troubles with scaling up a sketch or picture is pixellation ... all the lines etc. get jaggy and wide.

To PDF .... Win 10 already has a Print to PDF 'device' ... especially if you have any of the later Office Suites installed. If you have Office installed - you can install a better PDF creator called Nitro Pro ... creates much smaller files than the Office Printer version.

I no longer use the Tile to Print function unless I want to Tile a drawing to send to another person. I now just let the printer print by splitting automatically into pages - that way I don't lose 'margin areas as when printing tiled.
I'll fly anything if I can launch it ! Youtube : solentlifeuk
Quote 5 0
Sterling101
This should be about 74" span.
Not the greatest trace but it was only a quick job.  If I'd got a spare couple of hours I could digitise the whole thing and make it fully detailed and scaleable but that's something that will be for another day....
Whoever said nothing is impossible had obviously never tried slamming a revolving door...
Quote 2 0
Sidewayskiwi


Are you going for the worlds largest profile B17? 😃

4 ENGINED BIG SLOW FLYING CREATION (REALLY LOVE TINKERING)
PUT A CAMERA ON IT ETC
Quote 1 0
Sidewayskiwi


Are you going for the worlds largest profile B17? 😃

As you can see I love my big profile foamies
She's a Tomhe Super flanker with trick I learnt from Dave and RCPowers
(Outward angles on tail/rudders and undersides for stability)
This thing is a blast to fly stable at any speed ,vertical,cobra manoeuvre etc) 
Got a supply of 10mm and 15mm bluecore xps now 
FRCFoamies F16mk2 42" ws on the winter list
But first up is a 44" WS SeaDart that I've been wanting to make for a year now
Quote 2 0
bogusbandit56

As you can see I love my big profile foamies
Got a supply of 10mm and 15mm bluecore xps now 
FRCFoamies F16mk2 42" ws on the winter list
But first up is a 44" WS SeaDart that I've been wanting to make for a year now


Ahhh , I see cuz I was thinking it would be a bit floppy in 6 mm foam😃
I`d like to see that next spring, which should be my winter😃
Wot, no Depron?
Quote 1 0
Sidewayskiwi


Ahhh , I see cuz I was thinking it would be a bit floppy in 6 mm foam😃
I`d like to see that next spring, which should be my winter😃

ALSO A TIP 
CRUSH VIAGRA TABLET INTO THE PAINT
NO MORE FLOPPY WINGS ETC 
Quote 3 0