Combatevolved
Trying to put the under performing 50mm Dr Poo Thrust edfs to some use in a profile SU37. Hopefully it will fly.20180414_125757.jpg  20180414_130703.jpg  20180414_131009.jpg  20180414_144133_001.jpg  20180414_144144.jpg  20180414_161810.jpg 
Quote 3 0
Combatevolved
She's a bit of a frankinstein. Depron vertical stabilisers, engine nachelles and Elevons, combined with 5mm foam board and 10mm blue foam cockpit and nose. 20180414_200433.jpg 
Quote 3 0
andy_downs
Quote:
She's a bit of a frankinstein. Depron vertical stabilisers, engine nachelles and Elevons, combined with 5mm foam board and 10mm blue foam cockpit and nose. [ATTACH=full]54746[/ATTACH]

they are the ones that useally fly the best.
Quote 4 0
Wildthing
Quote:
Trying to put the under performing 50mm Dr Poo Thrust edfs to some use in a profile SU37. Hopefully it will fly.[ATTACH=full]54734[/ATTACH] [ATTACH=full]54735[/ATTACH] [ATTACH=full]54736[/ATTACH] [ATTACH=full]54737[/ATTACH] [ATTACH=full]54739[/ATTACH] [ATTACH=full]54740[/ATTACH]

Mine are in a box in the closet.
Quote 1 0
FlyteTime
Have you figured out where the battery is going to go to get it to balance out?
I'd rather have a bottle in front of me than a frontal lobotomy.
Quote 2 0
Combatevolved
Quote:
Have you figured out where the battery is going to go to get it to balance out?

Indeed I have. She balanced well with 3 and 4s inbetween the nachelle septum. She's a heavy plane now. 635g with a 4s 2200mah or 550g with a 3s 1500mah.20180415_094346.jpg  20180415_094122.jpg  20180415_092850.jpg 

Quote 5 0
FlyteTime
Looks great! With the weight of 2 edf's I was figuring that the battery would have to be well forward of where you have it to balance out. I love your creativity and willingness for experimentation.
I'd rather have a bottle in front of me than a frontal lobotomy.
Quote 2 0
Combatevolved
Trying to figure out if I can convert my FPV glider camera for use on the SU37 twin maiden.
The camera has 3 wires so the yellow control wire cannot be used which may or may not be a problem depending on whether it is powered up in the on state. The yellow wire is the control wire for switching on/off from the tx. Really hope I can get it working.20180421_105246.jpg  20180421_104915.jpg  20180421_105251.jpg 20180421_110520.jpg 
Quote 1 0