sukhoi69
Today I had a break in the weather so took the MCP X outside for a spin. I replaced the main blades with the normal ones I had been using the bullet blades before. Now at a certain point in the pitch it gets a weird wobble. Before and after this point it is fine. Also replaced the tail boom as well. Any ideas.
cheers



Hard to notice in vid but you might see something I don't.
Parkzone BF 109
Starmax MX2
RCPowers Mig 29 V1 70mm EDF
Parkzone Ultra Micro Corsair
Parkzone SE5A
Pheonix Glider
Shumate Sukhoi Su-37
UMX SBACH
RCP F 117 V1
Boxermad84 F4F Wildcat
https://www.youtube.com/user/rcpilot69?feature=mhee
Quote 0 0
JettaManDan
check to make sure your tail rotor blade is pressed all the way on. I've had some bad links that casued a wobble. I use the bullet blades only..they seem to be more stable...can also check your battery mount on the landing gear to make sure the battery is being held tight. Tons of info on helifreak on wobbling issues..i did the grommet mod and mine setled down great...

this is where i check for the latest info..

http://www.helifreak.com/forumdisplay.php?f=249
My YouTube Channel - 250+ Video's! http://www.youtube.com/jettamandan09

I'm an R/C Junkie! 40+ planes - 12 Heli's - 6 multirotors - and ground vehicles galore! I've got issues.
Quote 0 0
sukhoi69
Thanks mate I will check those out. Fingers crossed this weekend has good weather Will be vids galore have the sukhoi ready, MX2 ready my son is going to fly the F27Q again as well as our micro's and Parkzone birds. Just wish my SE5A had arrived another 2 weeks container didn't make it onto the ship in America. Come Monday back to the 450's. Finally catching up now time for flying.
Parkzone BF 109
Starmax MX2
RCPowers Mig 29 V1 70mm EDF
Parkzone Ultra Micro Corsair
Parkzone SE5A
Pheonix Glider
Shumate Sukhoi Su-37
UMX SBACH
RCP F 117 V1
Boxermad84 F4F Wildcat
https://www.youtube.com/user/rcpilot69?feature=mhee
Quote 0 0
JettaManDan
i'd do the grommet mod 1st..take you spare canopy grommets and split them in half..then add one of those halves to each swash ball before you put the links back on..really made mine have no shakes at all..free mod too...
My YouTube Channel - 250+ Video's! http://www.youtube.com/jettamandan09

I'm an R/C Junkie! 40+ planes - 12 Heli's - 6 multirotors - and ground vehicles galore! I've got issues.
Quote 0 0
sukhoi69
Will do.
Cheers
Parkzone BF 109
Starmax MX2
RCPowers Mig 29 V1 70mm EDF
Parkzone Ultra Micro Corsair
Parkzone SE5A
Pheonix Glider
Shumate Sukhoi Su-37
UMX SBACH
RCP F 117 V1
Boxermad84 F4F Wildcat
https://www.youtube.com/user/rcpilot69?feature=mhee
Quote 0 0
DanoInTx
+1 for the grommet mod

Dan
Quote 0 0
mark786786
check to make sure your tail rotor blade is pressed all the way on. I've had some bad links that caused a wobble.
Quote 0 0