DutchRC Show full post »
DutchRC
Adding the receiver seems to present a lot of people with challenges.. Here is how I add mine to the mix 🙂 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
DutchRC
On the home stretch now 🙂
This video is about the video-camera and installing it isn't complicated these days..

BUT.. what camera do you actually want?

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
TomMonton
I landed my mark 4 in a puddle last weekend and kinda messed a few things up ... so time to upgrade ?

I ordered the foxeer toothless cam this time, moving away from runcam for a change.  For recording I wanted to try just a simple 20x20 dvr and record directly off the FC (osd stuff attached) and see how well that works.

Other than the runcam split 2s nobody wants to put a usb port on the camera controller.  Everything else requires removing the sd card.

Any suggestions ?
Fly like your mad at it.
Quote 0 0
DutchRC

oeps. I don't waterproof my quads eighter by the way.. 

Hmm would you not slot the DVR in between the camera & FC (recording without OSD)? I was planning to try that at some point.. 
and yeah.. I don't like it eighter but we are probably going to need to pull the SD card out ever time 🙁 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
DutchRC
Last part of this build-series then!
In this part I show a couple of different VTX options, but mostly how to install / configure them 🙂

The VTX I'll end up using: Rush Tank Ultimate PLUS - 800mW

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
DutchRC
and.. also... 🙂 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
TomMonton
Very cool ... you're in business now.

That really is an interestingly different frame. Plan to a do a PID tuning example ?
Fly like your mad at it.
Quote 0 0
DutchRC

Yeah 🙂 Happy to finally have a flying quad 🙂 

 

Hmmm not sure! the series will be 10-video's long already after some flight testing.. 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
DutchRC
And there you have it! The LOS maiden with the "perfect FPV quad" 😃 
Not bad for an untuned quad I say.. 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
DutchRC
Als a DVR recording of my first FPV flight with it 😃 
I've never had a quad with such good (FPV) audio.. That Rush Tank Ultimate Plus is no joke 🙂 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0
TomMonton
This impressed me as well.  I just finished a rebuild of one of my 5" quads to include motors this weekend.

Each motor i had wired in an atypical pattern and then onto setup and discovery to learn how many of the four were backwards. Each motor was right on....huh... that never happens. Since watching your video this has happened twice ?

Let's hope that they have finally determined a default config to make this one step anyway, far less tedious for a basic build and setup.

Excellent stuff.


DutchRC wrote:
allright then.. time to turn our attention to some of the firmware things in the build 🙂
This time I'll make sure I have the latest firmware on the 4-in-1 (and I'm including it in this series because I have already tested THIS BLheli version on THIS ESC)..
And we'll make sure our motors spin the correct way around 🙂

Fly like your mad at it.
Quote 1 0
DutchRC

Ha! I had that exact same notion after this build.. this was also My second-in-row that didn't need reversing 😉  

But then the third build Did need some reversing 😋 

 

Ohw well. whit this video at hand it's not hard / complicated 🙂 

All kinds of planes, multi rotors, heli's, cars & boats..
Frsky Horus 10S | FlySky NB4 Noble
Quote 0 0