bimoadiprakoso Show full post »
jimbosflyin
JTiger wrote:
Looks good! I always love a good warbird design, especially the P-51. Looking at your design, I feel like it would help the scale lines a bit if this corner/edge weren't so corner-y, if you put a chamfer there to make it less boxy. The P-51 has a very rounded nose on the top And bottom, and the flat underside your model has right now doesn't quite give the right effect imo. 

PI mustang_LI.jpg 


mustang nose-ish.png 
I find the opening on the bottom is allowing needed air flow for cooling the esc.I have a 3D printed nose cone on mine and it pretty much makes it unnoticable.
Parkflyers International 
Quote 2 0
JTiger

move forward to the F-117


😍 Always another design on its way... Good luck!
Quote 2 0
solentlife
Following .... 
I'll fly anything if I can launch it ! Youtube : solentlifeuk
Quote 1 0
bimoadiprakoso
JTiger wrote:


😍 Always another design on its way... Good luck!


Thanks JTiger. We even has some things in the near future for rear mounted. Whether it's SU-57 with working LERX, Mig-35B, or some others.

Things have changed now. Designing the plane is now much faster with the help of software, and building it takes longer. The situation gets upside down. Even creating the instruction guide is waaay longer.

solentlife wrote:
Following .... 


Thanks solentlife ðŸ˜Š

Now it's time to have some laugh with britt humors. I miss UK ðŸ˜„


      "Hungry for better accomplishments in every way"
Quote 2 0
bimoadiprakoso
20190429_131552_HDR-1862x1397.jpg 

One step at a time.

      "Hungry for better accomplishments in every way"
Quote 2 0
Wildthing
20190429_131552_HDR-1862x1397.jpg 

One step at a time.


Getting closer 🙂 
Quote 1 0
Wildthing
I did sneak out yesterday for a quick flight before the combat wars started, she was windy out. She handles the wind pretty good, landing it was the fun part because the gusts were really erratic .

Quote 1 0
jimbosflyin
20190429_131552_HDR-1862x1397.jpg 

One step at a time.
Get that air brush ready,and start your 3D printed exhaust stacks and nose cone.😊
Parkflyers International 
Quote 1 0
jimbosflyin
Wildthing wrote:
I did sneak out yesterday for a quick flight before the combat wars started, she was windy out. She handles the wind pretty good, landing it was the fun part because the gusts were really erratic .

You still have'nt painted that plane ?😧
Parkflyers International 
Quote 1 0
Wildthing
jimbosflyin wrote:
You still have'nt painted that plane ?😧


That's a negative 🙂 
Quote 1 0