Mokey Mokey
I am planing on building planes that are 3 channel planes. I am also going to use the MJV3 motor on allllllll of them... (even if some one disagrees). for a radio i and using the wild hawk radio and receiver :zap: i still have 2 working servos (from the wild hawk,) so the question is which combo should i get....
this one...
http://www.graysonhobby.com/catalog/microjet-combo-microjet-p-765.html
or this one...
http://www.graysonhobby.com/catalog/grayson-hobby-microjet-flight-pack-bintermediateb-p-980.html?affiliate_banner_id=1
i know i will need new servos eventualy but are these metal gear servos worth buying this package

i hope for the best replys and possibly for Dave Powers to stop by
:boggled: Everything is okay untill i start to fly it... :um: *CReepskyblue">ASH* :um: *sigh* :boggled:
Quote 0 0
blaumph2cool
#1. get the MJ3 combo, you wont regret it.

#2. stop using all those blinking smily's they're annoying.
Quote 0 0
kevinm
ugh- heap big kevinm say " WH radio confused and go nuts when hot parts like 11.1 installed on old heap big WH" -" many moons ago my WH go nuts give up on WH radio" YRMV
Quote 0 0
Mokey Mokey
o sorry about flashy flashy
:boggled: Everything is okay untill i start to fly it... :um: *CReepskyblue">ASH* :um: *sigh* :boggled:
Quote 0 0
Mokey Mokey
do you think the v3 would work on a homemade foam cessna...?
:boggled: Everything is okay untill i start to fly it... :um: *CReepskyblue">ASH* :um: *sigh* :boggled:
Quote 0 0
Rcjetflyer2
On a two cell and 8x4 it would
Alfred Gessow Rotorcraft Center, University of Maryland
My Youtube: https://www.youtube.com/channel/UCPe7XrmOPtz4OjL6KGtvJMA
Quote 0 0
Mokey Mokey
ok... awsome, i found what i want to build :zap:
home made cessna with a v3 motor and 8x4 prop. and 3 channel control surface

this is the best video i have found for making home made foam bodys for planes...


awsomeeeeeeeeee
:boggled: Everything is okay untill i start to fly it... :um: *CReepskyblue">ASH* :um: *sigh* :boggled:
Quote 0 0
imyomama
can't beleive you didn't get any replies on your vid's .. saw part 1 and 2 .. all I can say is you got mad skills !!! that is an awesome build!! well done!
Quote 0 0
Argonath
I already posted this one. I though that how he did that was pretty good. I think at some point he mentions the AUW of the plane to be somewhere around 12 Oz's but I'm not 100% sure of that.


http://www.rcpowers.com/forum/showpost.php?p=47108&postcount=1
D.I.L.L.I.G.A.F.
Quote 0 0
Argonath
Quote:
On a two cell and 8x4 it would


I think this one would fly on a 2 cell 6x4 with the MJv3. It's apparently extremely light.
D.I.L.L.I.G.A.F.
Quote 0 0
Mokey Mokey
hmm sorry i have been on, but my wing seems really heavy... already like 10oz... haven't even had time to build the body... im not going to put the paper on caus ei feel the extra weight isn't needed.. if anything put it on the nose cause i like to nose dive..(not on purpose)
:boggled: Everything is okay untill i start to fly it... :um: *CReepskyblue">ASH* :um: *sigh* :boggled:
Quote 0 0
Jbirky
Do NOT sand it without respiratory protection. If you inhale that dust it will never break-down or leave your lungs.
Quote 0 0
jcrankshaw
The 8x4 prop on the mjv3 is HUGE! I don't recommend it for that motor. It will swing the 7x5 prop well. Use a 2s battery.

The mjv3 (micro jet version 3) is an awesome deal! I own 3 of these combos! Right now the combo is $69.99 and if you order a few extra props and a prop savor, shipping is free (75.00 and over ships free)
~~~~~~:bleh:JCrankshaw:bleh:~~~~~~~~

Jeff Crankshaw

My website: http://www.fairviewrcflier.webs.com

My email is: [EMAIL="fairviewrcflier@gmail.com"]fairviewrcflier@gmail.com[/EMAIL]

My YouTube Channel is: FairviewRCflier: (http://www.youtube.com/user/FairviewRCflier?feature=mhum)

F22v2 EDF:

F22v2 on a 4S with Megajet:
Quote 0 0
bluz_boy
Cool... now I know how I'm going to build my all-foam Dirty Birdy....
Quote 0 0