siddus74
Found my old V1 Mig29 plans after a long break, some great progress today.

Anybody else 3D print hardware with any success? Be great to share some files ….

Scott.

11..jpg  10.jpg  9n.jpg  8n.jpg  7_n.jpg  5n.jpg  6_n.jpg  2n.jpg  3n.jpg  4n.jpg  1n.jpg 
Quote 2 0
jimbosflyin
siddus74 wrote:
Found my old V1 Mig29 plans after a long break, some great progress today.

Anybody else 3D print hardware with any success? Be great to share some files ….

Scott.

11..jpg  10.jpg  9n.jpg  8n.jpg  7_n.jpg  5n.jpg  6_n.jpg  2n.jpg  3n.jpg  4n.jpg  1n.jpg 
         I have printed prop spinners ,missles ,controle horns ,motor mounts air vents for ESC's,canopy's ,exhuast nozzles.We have guys making wing ribs and I can go on and on.You can find alot of shared files on Thingivers and a few other sites that you can custimize the measurements to your needs.👌
Parkflyers International 
Quote 1 0
Wildthing
You bet, 3D print a lot of the parts now.
Your control horns look pretty elaborate , my only thought on those is the control rod holes you won't be able to center over the hinge line so you have equal throw up and down . 

These are my set of horns for the Mako as an example, the top right three are the ones that what I am talking about. These are glued in not that it matters and the little tab onderneathe the holes I actually removed because they would interfere with the deflection . 

2019_0109_112149_001.jpg 
Quote 0 0