Butch1953 Show full post »
unclejamal
Quote:
Banggood do them at a good price and I think shipping is free, a good chance to load up with cheap receivers as well This FlySky i-6has got to be the best bang for your buck ever, as you can get all sorts of telemetry as well.
http://www.banggood.com/FlySky-FS-i6-2_4G-6CH-AFHDS-RC-Transmitter-With-FS-iA6-Receiver-p-922606.html?rmmds=search

thx. i am looking for the TGY i6 version, since i need some other stuff from hk. is the i6 also programmable via PC with a cable like this https://hobbyking.com/de_de/hobby-king-2-4ghz-6ch-tx-usb-cable.html ?
an can i do the firmware update with that cable for the 10ch upgrade? if yes, which receiver do i need in order to use 10ch?
Quote 0 0
bogusbandit56
Quote:
thx. i am looking for the TGY i6 version, since i need some other stuff from hk. is the i6 also programmable via PC with a cable like this https://hobbyking.com/de_de/hobby-king-2-4ghz-6ch-tx-usb-cable.html ?
an can i do the firmware update with that cable for the 10ch upgrade? if yes, which receiver do i need in order to use 10ch?

Sorry I can not help you with those questions, I thought you were looking to buy an i-6 set.
Wot, no Depron?
Quote 1 0
unclejamal
Quote:
Sorry I can not help you with those questions, I thought you were looking to buy an i-6 set.

yes, this bundle https://hobbyking.com/de_de/turnigy-tgy-i6-afhds-transmitter-and-6ch-receiver-mode-2.html
Quote 0 0
bogusbandit56

Try this link on youtube
Wot, no Depron?
Quote 0 0
unclejamal

Fz1Fazer wrote:
Btw. it works great with this NI-ZN 1.6v rechargable batteries:
https://hobbyking.com/de_de/turnigy-rechargeable-battery-aa-1500mah-nizn-1-6v.html


25025[1].jpg 
I'f your LiPo charger can do storage charge, just load 2 in series (3.8v) and you don't need a special charger for them. [smile]


i bought four of these batteries along with this battery holder: https://hobbyking.com/en_us/4-x-aa-battery-holder-rx-pack.html

but how to hook up two of them in series to the charger in order to charge them (with your method of using the LiPo storage function). i could place two of them in the battery holder and short the two free slots of the holder in order to get the series connection. but connecting the servo plug of the battery holder to the balance connector of the charger won't work. do i need to make an adapter from the servo connector of the battery holder to the charger connector (in my case XT60), in order to charge the two batteries? (but in this case, what has to be connected on the balance connector?)

my charger is a Turnigy Accucel (https://hobbyking.com/en_us/4-x-aa-battery-holder-rx-pack.html)

Thanks

EDIT: dummy me was writing ESC all the time, instead of charger.

Quote 0 0