| |
 |
EuroFighter
|
|
|
Instructions
|
|
| |
|
|
|
|
Part
1: |
IMPORTANT:
This is NOT a beginner plane! If you are not already an intermediate to
advanced flyer, do NOT get this plane, you will not be happy. Picture the
EuroFighter as a super stunt plane, not something you want to start out
on. If you are new to RC, get a flight simulator and learn how to fly before
you attempt to fly anything. |
|
|
|
|
|
| |
Home |
|
|
|
|
|
| Airplanes |
|
| Airsoft |
|
| Helicopters |
|
| Power
Combos |
|
| Videos |
|
| |
|
| Webcam
LIVE! |
|
|
|
| |
BEFORE
YOU START: Please watch the instructional video, view all the
pictures, before you start. This way you have an overview of what's
going on and will be able to "fill in the banks" yourself as you
go along. After you have read all the instructions, seen the instruction
videos, and studied the pictures, if you still have questions please email
me and I will help you out. |
|
|
|
Part
2: |
|
Part
3: |
|
|
|
|
|
|
|
| |
|
|
1)
Glue wing halves together |
|
| I
use 5 min epoxy on the entire build. |
|
 
|
2)
Install 15" carbon tube |
|
|
-
Scroll the foam with a razor blade where you want the rod to be. Do not
cut all the way through.
- Use a small standard screwdriver to pluck out the foam.
- Epoxy in the tube. |
|
|
| |
|
|
|
|
|
|
|
|
 
|
3)
45 Control Surfaces |
|
|
| Use
a straight edge and razor blade to “45” all the edges. |
|
|
 
|
4)
Smooth Leading Edges |
|
|
| |
|
|
|
|
|
| 5)
Glue Plane Halves Together |
|
|
| Do
a dry fit first to make sure everything lines up well. |
|
|
  |
6)
Glue Down Plywood Mounts |
|
|
| |
|
|
| |
|
|
|
7)
Glue Front 15" carbon tube in the Nose |
|
|
|
|
|
| This
is to reinforce the front end. |
|
|
|
8)
Glue Control Horns in |
|
|
| Like
the F-22 and MiG-29, make sure the elevator servos are installed like pictured
so they work together when Y-connected to move the elevator. |
|
|
|
|
|
|
9)
Install Servos |
|
|
| |
|
|
  |
|
|
| 10)
Pushrods |
|
|
|
|
|
| Use
JB Weld or something similar to stick the carbon and metal together for
the pushrods. |
|
|
| |
|
|
| |
|
|
 
|
|
|
|
|
|
|
|
|
  |
11)
Motor Mount |
|
|
|
|
|
|
|
|
|
| http://www.rcgroups.com/forums/showthread.php?t=665791&page=21 |
|
|
 
|
|
|
 
|
|
|
| 12)
Battery and CG |
|
|
| |
|
 
|
|
 
|
|
|
|
| THE
SCALE SET UP: |
|
|
13)
Cut and Install Canards |
|
|
-
The balsa stick is glued to the servo horn.
- The toothpics secure the horn and balsa to the canard. |
|
|
|
|
|
|
|
  |
|
  |
|
|
|
|
14)
Scroll, Fold, and Install Underbelly |
|
|
| Don’t
cut all the way through. Score and fold from angle to angle. |
|
|
|
|
|
| 15)
Install Underbelly |
|
|
| -
Cut a window where needed for your servo pushrods. |
|
|
|
|
|
|
|
|
|
 
|
|
| 16)
Glue Down the 1” Fuselage |
|
|
-
Epoxy it down good and cut place for your battery.
- Epoxy and pin the Velcro for the hatch. Have epoxy on the pins to bolt
them to the foam. |
|
|
|
  |
|
  |
|
  |
|
  |
|
  |
|
|
|
  |
17)
Rudder |
|
| |
|
  |
|
| |
For
Center of Gravity and updates see page:
http://www.rcgroups.com/forums/showthread.php?t=684510&page=12
|
|
| |
|
|
|
© 2008
RCPowers.com
About
Us * Contact/FAQs
* Links
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
